Product Categories
Contact Us

HGG Head Office: 

Room 1005 ,Tongfang information Building, 448 Zhong kai da dao, Zhongkai district, 
Huizhou City,Guangdong Province ,China 516001

Tel: 86-752-3865186
Fax: 86-752-3865183
WhatsApp: 86-13480589850


Home > News > Content
Glass Railings Installation
Hopson Glass Group Co., Ltd | Updated: Jul 17, 2017

              Because the glass guardrail is not only decorative, more important is the safety protection function, so the glass guardrail selection should be appropriate, installation should be appropriate, glass guardrail is a force component, very easy to bear pushing and other external forces, glass guardrail used in the glass must have enough strength.

              1, Glass guardrail plane installation points; Glass guardrail must be tempered glass or clip-glue glasses, tempered glass thickness should not be less than 12mm, glass should not be directly contact with the rigid joints, the two should be flexible material liner, when the design uses both sides of the embedded glass guardrail, glass into the column groove should have more than 3mm of clearance, the gap with glass sealant filled, glass embedded groove depth is not less than 12mm.Glass Railings

               2, Glass guardrail base column installation points: When the guardrail to glass instead of column, the glass should be left out of the gap between the 8mm or so, glass and other materials should also be left at the intersection of 8mm clearance, clearance application sealant fill. The base of the glass guardrail is a key part of the fixed guardrail, which is generally required to be assembled into fixed glass by means of angle steel, with the expansion screw and the floor or with the welding and the preset connection fixed firmly, not loose, the glass and the fixed piece trough bottom uses the rubber support block which the hardness is $number, the glass extends into the fixed piece depth is greater than 100mm, the glass extends into the fixed piece side (namely with angle steel, the steel plate) should leave out the 3~6mm clearance, uses the Neoprene board liner, and the glass clamps tightly. Between the steel plate and glass need to leave a gap of around 6mm, glass and other materials at the intersection of the site also to leave the gap of about 6mm, clearance with glass sealant fill.Glass Railings

              After the installation of the inspection confirmed security firmly not loose, the guardrail base surface for decorative coverage, it is necessary to note that the cover material must not directly contact the glass, covering the gap between the material and glass should be filled with glass sealant.Glass Railings

Hopson Glass Group Co., Ltd

If you are interested in our products ,please feel free to contact with us 

We will contact with you within 24H , thank you ! Our email is

Copyright © Huizhou Hopson Glass Group Co., Ltd. All rights reserved.