Product Categories
Contact Us

HGG Head Office: 

Room 1005 ,Tongfang information Building, 448 Zhong kai da dao, Zhongkai district, 
Huizhou City,Guangdong Province ,China 516001

Tel: 86-752-3865186
Fax: 86-752-3865183
WhatsApp: 86-13480589850


Home > News > Content
Plastic Glass For Elevator Glass
Hopson Glass Group Co., Ltd | Updated: Jul 17, 2017

            Sandwiched Glass is a kind of two piece or more pieces of glass and special plastic or plastic film combination of excellent performance of safety glass, from the appearance of the transparency and purity of the glass is similar to ordinary glass, but because there is glue and adhesive film between the glass, broken glass will not fall off the debris, while the glue glass can block sound waves, maintain a quiet and comfortable office environment, its unique filter ultraviolet function, that is, to protect the health of people's skin and the home of luxury furniture and display products to get rid of the fading doom. In the past, the production of laminated glass, with imported film, higher prices, in addition to enterprises and institutions, home decoration is rarely used. The appearance of laminated glass glue greatly reduces the production cost and processing difficulty, does not need the large-scale equipment, can produce the glue glass by hand.Elevators Glass

            Elevators Glass Operating methods are as follows: 1, according to the requirements of cutting glass error less than 2mm. 2, the glass with cleaning agent to oil, wipe dry with cloth and then clean cotton cloth stained with acetone wipe degreasing, glass surface can not have oil and adhesion. 3, the clean layer of three or two layers of white glass and tempered glass stacked up, in the middle of the transparent film, distance of 30 cm, surrounded by a transparent tape, sealed with good tapes, Four corners to be sealed once again, and then in one of the sealing tape cut one points to glue the glue, then the epithelium tube began to glue, pay attention to the skin tube do not have air. The other end of the glass is punctured by a small hole so that the air is discharged. 4, potting Process if there is a bubble, with a clean sheet of thin iron inserted into the bubble position of a pull, the bubble came out. 5, make a good glass to bask in the sun for three hours is the finished product, the glass above do not put anything. 6, the plastic liquid in the glass must dry day, can not wait for the next day to bask. 7. When the weather is bad, you can use the 40W ultraviolet lamp ordinary tube, according to the 10-20mm spacing evenly distributes, according to bask 40 minutes can. 8, each square metre of glue thickness: 0.38mm glue 0.45kg, 0.76mm glue 0.86kg, 1mm with glue 1. The proportion of the calculation of the number of the amount of rubber, with a few, the proportion of curing agent is 1 per thousand, with a small amount of alcohol diluted into the glue to stir.Elevators Glass

Hopson Glass Group Co., Ltd

If you are interested in our products ,please feel free to contact with us 

We will contact with you within 24H , thank you ! Our email is

Copyright © Huizhou Hopson Glass Group Co., Ltd. All rights reserved.